• New product
Graham Slee Solo Ultra-Linear DE
Graham Slee Solo Ultra-Linear DE
Graham Slee Solo Ultra-Linear DE at eden audio
Graham Slee Solo Ultra-Linear DE at eden audio

Graham Slee Solo Ultra-Linear DE

Out of stock but can still be ordered
£670.00
Tax included
Contact Us For Delivery Times

Be blown away by the amazing sound quality of the Graham Slee Ultra Linear Diamond Edition Headphone Amplifier, this British made amplifier is something else, it really is another must listen from the brand. Relax and immerse yourself with with favourite music and your comfortable headphones and will be taken to new places with the majestic sound quality of this headphone amplifier.

help_outlineAsk about product
Graham Slee Solo Ultra-Linear DE

Graham Slee Solo Ultra-Linear DE

Be blown away by the amazing sound quality of the Graham Slee Ultra Linear Diamond Edition Headphone Amplifier, this British made amplifier is something else, it really is another must listen from the brand. Relax and immerse yourself with with favourite music and your comfortable headphones and will be taken to new places with the majestic sound quality of this headphone amplifier.

I accept privacy policy rules  

 

Graham Slee Solo Ultra Linear Diamond Edition Headphone Amplifier (Includes PSU1 Power Supply)
The new Solo Ultra-Linear Diamond Edition hi-fi headphone amplifier gives you the sound you always wanted from a headphone amp! A headphone amplifier truly capable of making good headphones deliver a lifelike, dynamic and breathtaking performance with a real out of head three-dimensional stereo sound stage.
The Ultra-Linear voltage amplifier stage gives you the smoothness and warmth of a tube amp, yet with all the precision, fine detail, and punchy sound of the solid state amp it is. Plus, it won't wear out like tubes.
Make the Solo Ultra-Linear Diamond Edition your reference!

Features
Ultra-low noise:the Solo Ultra-Linear Diamond Edition is now also ultra-low noise as well as being ultra-linear.

Higher output current: its output stage has been beefed-up to take control of the most difficult headphones with ease.

No dangerous DC on the headphone output prevents headphone damage: it only takes a small amount of DC offset to heat up the windings of headphone transducers. That heat softens the adhesive which keeps the "voice-coils" in place, and eventually your headphones don't perform all that well. All our headphone amplifiers block DC offset from reaching your headphones.

Tape monitoring: the Solo Ultra-Linear Diamond Edition headphone amplifier has two inputs and a non-shorting mute. Its input switching can be used in tape monitoring as shown here.

(An extra pair of interconnects are required as well as two phono tee-adapters inserted where indicated by the asterisks shown in the diagram)

When connected as per this suggestion, the input selector on the Solo front panel mimics a tape monitor switch. In position 1, the same source as selected on the amplifier is fed to the Solo; in position 2, the output from the tape recorder (or other recording device) is fed to the Solo.

Headphone sensitivity volume control: unlike conventional volume controls, this one is designed to be used over its full rotation to compensate for a wide range of headphone impedances and sensitivities. This avoids the use of gain switches which would otherwise result in differing performance characteristics depending on the gain setting.

 

 

 

Specification
Headphone impedance range: 8 to 2,000 Ohms / 16 to 600 Ohms preferred

Power output: (rms, both channels fully driven at 1% THD)
32 Ohms: 140mW/channel; 600 Ohms: 30mW/channel

Input sensitivity (for specified power output into 32 Ohms): 511mV rms

Input impedance: 37k Ohms at max volume; 50k Ohms at min volume

Distortion: (THD plus noise at 9 o'clock volume control setting (qtr power))
10Hz-20kHz: better than 0.04%; 10Hz-1kHz: better than 0.02%

Frequency response (±0,-3dB) 10Hz - 35kHz

Output noise: (22Hz-22kHz, quasi-peak/un-weighted) -95dB

Channel balance: better than 1dB

Crosstalk: Left to Right -56dB; Input to Input -68dB

Input selector centre-off position: non-shorting; -38dB at max volume with 2V rms input (ref: 1kHz and 10kHz)

Output Stage: Bipolar class AB

Supply voltage: 24V DC unipolar

Size: (approx.) W: 107 x H: 50 x D: 185 (mm) inc. controls

  

Reviews

Write your review

Graham Slee Solo Ultra-Linear DE

Be blown away by the amazing sound quality of the Graham Slee Ultra Linear Diamond Edition Headphone Amplifier, this British made amplifier is something else, it really is another must listen from the brand. Relax and immerse yourself with with favourite music and your comfortable headphones and will be taken to new places with the majestic sound quality of this headphone amplifier.

Write your review

Product added to wishlist
Product added to compare.

We use cookies on our websites. You are free to manage this via your browser setting at any time.